Fixed position control

The various climate controls are set to a fixed position (0 or off) by default. You can manage the fixed position settings on the fixed position screen.

Figure 95: Fixed position screen

To open the fixed position screen, tap the Fixed Position icon '‘ on the top bar. The fixed position screen displays all the associated climate controls. You can configure the fixed position settings independently for each zone. You can choose from:

• A fixed position

  This means you set a fixed position or operating mode.

• Control mode

  Control mode means that the settings from stage control will be used.

Configuring fixed position settings

To configure the fixed position settings, proceed as follows:

• Tap a value. A pop-up window appears.
• Choose one of these:
  • Enter a fixed position (for example, 40%) or a fixed operating mode (for example, on).
  • Tap the Control Mode icon ‘'.
• Tap confirm ‘'.

You have configured the fixed position settings.

Figure 96: Configuring fixed position settings

Fixed positions are not adjusted for the climate conditions inside your greenhouse and they apply for the entire day. Fixed position control enables a desired position or mode to be achieved quickly without altering any of the other program settings.